AN4052 Rev 8
NOTES:
1.Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Break sharp edges and remove all hanging burrs and slivers.
4. Unless otherwise noted tolerances shall be ± .010 inches (0.254mm) and angles ± 2.
Part or Identifying Number (PIN): The PIN consists of the letter "AN" the specification sheet number,
and a dash number. AN4052-1
AN
4052
-
1
Size (There is only one size for this specification)
Specification number
AN prefix
Material: Chrome-nickel-molybdenum steel in accordance with SAE-AMS6274 or chrome-nickel-
molybdenum steel aluminum in accordance with SAE-AMS6470 or SAE-AMS6272.
Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
Referenced documents shall be of the issue in effect on date of invitations for bid.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with
respect to previous issue due to the extensiveness of the changes.
Referenced documents: This document references the following documents:
SAE-AMS6274
SAE-AMS6470
SAE-AMS6472
2