MS20270E
TABLE II. Size designator. 1/
Size designator |
Nominal size of universal joint fraction |
Nominal OD of universal joint inch |
Nominal size of universal joint mm |
|
Type A |
Type B |
|||
--- |
6 |
3/8 |
.375 |
9.53 |
8 |
8 |
1/2 |
.500 |
12.70 |
10 |
10 |
5/8 |
.625 |
15.88 |
12 |
12 |
3/4 |
.750 |
19.05 |
--- |
14 |
7/8 |
.875 |
22.23 |
16 |
16 |
1 |
1.000 |
25.40 |
20 |
20 |
1 1/4 |
1.250 |
31.75 |
24 |
24 |
1 1/2 |
1.500 |
38.10 |
1/ Size designators are SAE convention (16's of an inch).
Plating designator, see table III.
TABLE III. Plating designators.
Designator |
Plating |
Blank |
Cadmium |
P |
Zinc phosphate |
Z |
Zinc |
N |
Cadmium with TCP |
PN |
Zinc phosphate with TCP |
ZN |
Zinc with TCP |
Guidance on use of alternative parts with less hazardous or non-hazardous materials. This specification provides for a number of alternative plating materials via the PIN. Users should select the PIN with the least hazardous material that meets the form, fit, and function requirements of their application.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. This document references MIL-DTL-6193.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business