MIL-DTL-6193 Joints, Universal, Plain, Light And Heavy Duty, General Specification ForThis specification covers the requirements for joints, universal, plain, light and heavy duty, for use in intermittent operations \(see 6.1\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20

MIL-DTL-6193D

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this

specification. This section does not include documents cited in other sections of this specification or

recommended for additional information or as examples. While every effort has been made to ensure the

completeness of this list, document users are cautioned that they must meet all specified requirements

documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and

handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the

issues of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-PRF-7870

Lubricating Oil, General Purpose, Low Temperature

MIL-PRF-32014

Grease, Water Resistant, High Speed, Aircraft and Missile

MIL-PRF-81322

Grease, Aircraft, General Purpose, Wide Temperature Range

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-130

Identification Marking of U.S. Military Property

MS20270

Joint - Universal, Plain, Light Duty

MS20271

Joint - Universal, Plain, Heavy Duty

(Copies of these documents are available online at https://assist.daps.dla.mil or

https://assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins

Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.3 Non-Government publications. The following documents form a part of this document to the

extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

ASTM INTERNATIONAL

ASTM-B633

Zinc On Iron And Steel Electro-deposited Coatings Of

ASTM B659

Standard Guide for Measuring Thickness of Metallic and

Inorganic Coatings

ASTM-D1171

Standard Test Method for Rubber Deterioration - Surface Ozone

Cracking Outdoors or Chamber (Triangular Specimens)

(Copies of these documents are available from https://www.astm.org or from the ASTM International,

100 Barr Harbor Drive, PO Box C700, West Conshohocken, Pennsylvania, 19428-2959.)