MIL-U-3963A
MIL-STD-130. The nomenclature shall be as
(a) Preproduction tests (sea 4.2)
follows :
(b) Acceptance tests (see 4.3)
Size MS
4.2 Preproduction tests.
Manufacturer's name and part number
4.2.1 Sampling instructions The Prepro-
U.S. Property
duction test samples shall consist of models rep-
3.6 Workmanship. Joints shall be sound
resentative of the production equipment. They
and of uniform quality and condition, free from
shall be tested at a laboratory designated by the
scale and injurious defects, such as cracks,
procuring activity or, when so stated in the con-
seams, tears, grooves, laminations, pits, blisters,
tract at the contractor's plant under the super-
and any other defects which might affect serv-
vision of the procuring activity. Test samples
iceability.
shall consist of specimens of the same size and
4. QUALITY ASSURANCE PROVISIONS
part number in quantities as follows:
(a) MS24312, MS24313, and MS24314, 16
4.1 Classification of tests. The inspection
joints
and testing of universal joints shall be classified
(b) MS24315 and MS24316, 10 flanges
as follows:
TABLE I. -LOADS
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business