MILITARY (Continued)
MIL-A-24533/1 - Actuator, Rotary, Hydraulic 2-Position, Rack-and-
Pinion Type 3,000 to 35,000 inch-Pounds Torque
2-Bolt Mounting.
MIL-A-24533/2 - Actuator, Rotary, Hydraulic 2-Position, Rack-and-
Pinion Type 5,000 to 92,000 Inch-Pounds Torque
4-Bolt Mounting.
STANDARDS
MILITARY
- Welding and Casting Standard.
MIL-STD-278
- Cushioning, Anchoring, Bracing, Blocking, and
MIL-STD-1186
Waterproofing; with Appropriate Test Methods.
- Bearings and Bushings, Plain, Preferred for
MIL-STD-1762
Design, Listing of.
MIL-STD-2073-1 - DOD Material Procedures for Development And Appli-
cation of Packaging Requirements.
MIL-STD-2193
- Hydraulic System Components, Ship.
(Unless otherwise indicated, copies of federal and military specifications,
standards, and handbooks are available from the Standardization Documents Order
Desk, BLDG. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.)
2.2 Non-Government publications. The following documents form a part of
this document to the extent specified herein, Unless otherwise specified, the
issues of the documents which are DOD adopted are those listed in the issue of the
DODISS cited in the solicitation. Unless otherwise specified, the issues of
documents not listed in the DODISS are the issues of the documents cited in the
solicitation (see 6.2).
AMERICAN GEAR MANUFACTURERS ASSOCIATION (AGMA)
390 03 - Handbook, Gear Classification, Materials and Measuring
Methods for Bevel, Hypoid, Fine Pitch Wormgearing and
Racks Only as Unassembled Gears.
(Application for copies should be addressed to the American Gear
Manufacturer's Association, 1500 King St., Suite 201, Alexandria, VA 22314.)
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
B46 1 - Surface Texture (Surface Roughness, Waviness, and Lay).
(DoD adopted)
(Application for copies should be addressed to the American National
Standards Institute, Inc , 1430 Broadway, New York, NY 10018 )
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
D 3951 - Standard Practice for Commercial Packaging.
(DoD adopted)
(Application for copies should be addressed to the American Society for
Testing and Materials 1916 Race St , Philadelphia, PA 19103.)
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business